MAXPRO4800 4800W High Power Home Red/Infrared Light Therapy
- Product Details
- Product Parameters
- What IS LED Light Therapy
- Product Size
|Power||4800W||Wavelength||660nm & 850nm=1:1|
|Input voltage||AC100~277V||Color Ratio||Red light + Near infrared light
|Size||1832x535x65mm||LED Qty||960pcs x 5W(dual chip)|
|Beam Angle||60 Degrees||Time & LED Control||√|
|Working Frequency||50/60 Hz||Work Temperature||-20°-40°|
|Warranty||5 Years||Lifespan||50,000 hrs|
Q: How long should I use the device for?
A: It depends completely upon the area being treated and the distance of treatment. For information on dosing, please see the previous page titled Dosing. In general, all that is usually needed is 10-20 minutes .
Q: When can I expect results?
A:Results vary depending on goals and treatment .consistency. With that being said, many people will experience benefits such as increased muscle recovery, relief of pain and increased wound healing relatively quickly. However,more systemic benefits such as enhanced skin health, increased energy, improved hormonal health and increased quality of sleep may take 8-12 weeks of consistent use. Using your device every day will maximize the rate of response and healing. It is very important to be consistent with red light therapy.
Q: Should I wear eye protection?
A:Eye protection is not required or necessary.However, we don’t recommend looking directly at the LEDs because it can sometimes be uncomfortable. With that said, your eyes typically become accustomed to the light and it is then OK to open your eyes, as long as you aren’t feeling discomfort.
Q: How long should I use the device for?
A: Does red light therapy interfere with the medications? A: Red and near infrared light therapy has been proven in thousands of clinical studies and peer reviewed clinical trials to be not only safe but also effective. However, if you use medications such as Tetracycline, Digoxin,Retin A, and/or other photo sensitizing drugs,we recommend consulting with your doctor or health care provider before using the device.
Q: Why aren’t the Infrared LEDs working?
A:I can’t see them. Near infrared (NIR) light is actually not visible to the naked human eye. It is outside of the visual spectrum, and as a result, it cannot be seen. However, there is a very slight glow that comes from the L EDs, es pecially in dark conditions, so if you are
concemed the NIR LEDs are really not working, you can test them that way .
Q: Can children use the device?
A:Yes, children can use the device under adult supervision. Never use the device on infants, though. lf a child is older than 12 years old, they may follow the previously referenced treatment times. If a child is younger than 12 years old, they should opt for half the dose that would be
Q: Can I wear clothing during my treatment sessions?
A: Of course, just make sure that the area that you’re treating is completely exposed.
What IS LED Light Therapy?
Red and near infrared light therapy, also known as photobiomodulation (PBM) involves the use of specific wavelengths of natural light in the mid 600 and mid 800 nanometre to enhance the health and function of our cells without any harmful UV rays, excess heat, or negative effects.Light therapy is among the earliest recorded healing modalities. Solar therapy was first used by the Egyptians, and forms of light therapy were also practiced by the ancient Greeks, Chinese and Indians. There’s no question that light exerts biological effects: in fact, the body needs light to be healthy
What is VIGPRO Wavelength ?
VIGPRO is combo red light 660nm and Near Infrared 850nm light . Red light at 660nm :this wavelength is absorbed at higher proportion by skin tissue ,making it especially effective for boosting skin health and increasing collagen production .Near Infrared light is at 850nm ,this wavelength is actually outside of the visual spectrum ,so it appear as if the NIR light is not working ,but they just can’t been seen by the naked eyes.Near infrared light has a particularly strong ability to penetrate deeper into the tissue ,organs and joints ,making it ideal for enhancing muscle recovery and reducing joint pain
LED red light therapy function?
1. Skin beautification and whitening: promote human metabolism and promote the growth of collagen
2. Pain Relief: Reduce pain by relieving joint stiffness and soreness, anti-inflammation, soothing muscle spasms and promoting blood flow
3. Anti-wrinkle and anti-spot: accelerate healing and wound repair, improve the appearance of hypertrophic scars, reduce fine lines and wrinkles, and improve skin texture
4. Gain muscle and lose weight: accelerate muscle repair after fatigue and mitochondria in injured cells further help muscle recovery
5. Other functions: reduce inflammation, reduce hair loss, improve men’s health, etc.